--- title: Support and troubleshooting in 12VPX description: Fix the most common problems in 12VPX on Mac and Windows, such as no internet after a drop, a gray Connect button, a failed sign-in or a server list that won't update, read message codes such as V23A2A, send us your log, and reset or uninstall the app. --- This page helps you fix the most common problems in 12VPX, explains the codes in its messages, and shows how to send us your log when you need our help. AUTOMATIC_TABLE_OF_CONTENTS ## No internet after the connection dropped If the status line says **Disconnected and protected by VPN killswitch**, the kill switch is blocking your internet on purpose, because the connection failed or your network changed. Either: - click **Disable VPN killswitch** to get your internet back without connecting, or - answer **Yes** when 12VPX asks **VPN killswitch protection active**, to get your internet back and connect again. Quitting 12VPX also lifts the block. If your internet is still blocked after 12VPX closed unexpectedly, start it again and click **Disable VPN killswitch**. To stop this from happening, see [Kill switch](/en/docs/12vpx/settings#kill-switch). ## Connect is gray - **The configuration is too old.** If the date after **Configuration:** is more than 72 hours old, choose **Update configuration** in the app menu. If that fails, see [The server list won't update](#the-server-list-wont-update). - **The helper isn't ready.** The status line says **Waiting for the VPN helper**, or the app is installing it. See [The helper](#the-helper). - **There is nothing to connect to.** The server has no connection type you can use, or the list is still loading. Choose another server, or wait a moment. - **12VPX is busy** disconnecting. Wait until it finishes. ## Can't sign in If 12VPX can't sign you in, it shows a message titled **API server communication failure**, usually with **Login failed:** and a reason: | Message | What to do | | --- | --- | | **Username or password is not correct.** | Use the **VPX username** and **VPX password** from our [Credentials page](/en/credentials), not your e-mail address and website password. | | **Please use your VPX Access Service username, not your e-mail address.** | Enter your VPX username from the [Credentials page](/en/credentials). | | **Too many failed logins.** | Wait the minutes the message says, check your VPX password on the [Credentials page](/en/credentials), then try again. | | **Security token expired.** | Quit 12VPX, start it again and sign in. | | **VPX Access Service Terminated.** | Your service has ended. You can order a new one on our website. | | **Your VPX service is suspended…** | See [Account suspended](/en/docs/12vpx/connecting#account-suspended). | | **Device limit reached** | See [Device limit reached](/en/docs/12vpx/connecting#device-limit-reached). | | **Application not supported** | Your version of 12VPX is too old. [Update it](/en/docs/12vpx#updates). | | **The API server appears to be unavailable.**, or the status line stays on **Connecting to API server** | Your computer couldn't reach our website. See below. | After **Login failed**, 12VPX signs this computer out, so sign in again once the problem is fixed. If your computer couldn't reach our website: 1. Check that websites open without 12VPX connected. On hotel, airport or café Wi-Fi, complete the network's sign-in page in your browser first. 2. Try another network, such as your phone's hotspot. 12VPX also tries other addresses of our website by itself. 3. On a company network, or with security software that inspects secure connections, try **Use system certificates for web traffic**. See [Company networks](/en/docs/12vpx/settings#company-networks-and-other-advanced-settings). ## The server list won't update When an update of your list of servers fails, the status line says **Server list update failed** and when 12VPX tries again, after **Next try at**. On a Mac, hold the pointer over it to see the reason. 12VPX keeps using the list it has. - **While connected,** the update goes through your connection. If that connection doesn't carry traffic, the update fails too. Disconnect and choose **Update configuration**, or connect with another server or connection type and try again. - **While not connected,** your computer can't reach our website. Follow the steps under [Can't sign in](#cant-sign-in). Once the list is more than 72 hours old, **Connect** is gray until an update works. See [Keep your server list up to date](/en/docs/12vpx/connecting#keep-your-server-list-up-to-date). ## Connected, but nothing loads If 12VPX says you are connected but websites or apps don't work, try these in order: 1. **Another connection type,** then **another server.** If one works, tell us which one failed. 2. **The date and time.** Turn on automatic date, time and time zone in your computer's settings. See [Wrong date and time](#wrong-date-and-time). 3. **Update your list of servers** with **Update configuration** in the app menu. 4. **Another VPN app, proxy tool or security software.** Quit it or turn it off, then connect again. See [Other programs on your computer](#other-programs-on-your-computer). If 12VPX shows **VPN connection problem**, the connection is up but doesn't carry traffic: choose another server or connection type. If everything works but slowly, see [Why is my connection slow?](/en/docs/slow-connection) ## Some apps don't use the connection - **WEB without TUN mode.** If the main window shows **TUN disabled**, only apps that use your computer's proxy settings go through the connection. Use an XTLS type, or turn on **TUN for WEB**. See [System proxy and TUN mode](/en/docs/12vpx/settings#system-proxy-and-tun-mode). - **Calls and games on WEB.** WEB connections can't carry UDP traffic, which many calls and games use. Use an XTLS type. - **Warning: system proxy is not set.** Turn **System proxy** back on under **Advanced**. - **VPN Bypass.** Destinations in your bypass rules skip the VPX service on purpose. See [VPN Bypass](/en/docs/12vpx/settings#vpn-bypass). ## Wrong date and time **Wrong date and time** means your computer's clock is 10 minutes or more off. Some of our servers then refuse the connection, so it might not work, or only partly. A correct time with the wrong time zone counts as wrong too. - **Windows:** in **Settings → Time & language → Date & time**, turn on setting the time and the time zone automatically. - **Mac:** in **System Settings → General → Date & Time**, turn on setting the date, time and time zone automatically. Then connect again. ## Other programs on your computer Another VPN app, a proxy tool or security software that filters traffic can get in the way of 12VPX: - **Another program interferes with the VPN** (version 1.48 and newer) means such a program sends the connections of 12VPX back into the app, so nothing gets through. Quit the program or turn it off, then connect again. Another server doesn't help. On a Mac, **System Settings → Network** lists other VPNs and filters. - **Unexpected change to proxy settings** means another program changed your computer's proxy settings while you were connected. Find that program and quit it. ## The helper 12VPX uses a helper to change your network settings. It can't connect without it. - **Waiting for the VPN helper** (**Waiting for the VPN helper service** on Windows) usually goes away within a minute after your computer starts or wakes up. - **VPN helper installation cancelled** (Mac) means the administrator password prompt was cancelled. Click **Connect** and approve the prompt with an administrator's password. - **Helper tool is not available** (Mac) means the helper couldn't be installed. Choose **Try Again**. If it fails again, [send us your log](#send-us-your-log). - **VPN in use** means another user on this computer is connected with 12VPX. Only one user can be connected at a time: they disconnect first. On Windows, only one user can even run 12VPX at a time. If **Waiting for the VPN helper** doesn't go away, security software may have blocked or removed the helper. This happens most often with 360 Safeguard and 360 Total Security: 1. Open your security software. Look in its quarantine for 12VPX or `vpnguihelper`, and restore it. 2. Add an exception for the 12VPX folder, or turn the security software off while you use 12VPX. 3. Install 12VPX again from the setup guide for [macOS](/en/setup/macos/12vpx-macos) or [Windows](/en/setup/windows/12vpx-windows). Do step 2 first, or the security software may remove the helper again. ## Message codes From version 1.48, 12VPX adds a code to its messages, such as **V23A2A**. It is on the last line of a message ("Code V23A2A"), or in brackets after the text in the status line. The code helps you look the message up, and helps us see at once what happened: always include it when you write to us. ### Read a code A code has six characters. **V34** at the start means Windows and **V23** means Mac; the last three characters name the message, the same on both. So **V34A46** and **V23A46** are the same message. Codes never contain 0, 1, B, I, L or O. If you see a B, it is an 8; a 0 or O is a D. ### Look a code up in the app Choose **Help** (Mac) or **Help...** (Windows) in the app menu. The window lists every code with an explanation and what you can do. Type a code, or a few words of the message, in the search field to find it. If your app has no **Help** item and its messages have no codes, it is older than version 1.48: look the message text up in the table below instead. ### Codes you're most likely to see | Code on Windows, Mac | Message | What to do | | --- | --- | --- | | V34A2D, V23A2D | **Login failed** | See [Can't sign in](#cant-sign-in). | | V34A34, V23A34 | **Device limit reached** | Remove a device you no longer use. See [Device limit reached](/en/docs/12vpx/connecting#device-limit-reached). | | V34A36, V23A36 | **The API server appears to be unavailable** | See [Can't sign in](#cant-sign-in). | | V34A35, V23A35 | **Application not supported** | [Update the app](/en/docs/12vpx#updates). | | V34A67 to V34A6C, V23A67 to V23A6C | **Account suspended** | See [Account suspended](/en/docs/12vpx/connecting#account-suspended). | | V34A38, V23A38 | **Connection failed** | Try again, then another connection type or server. | | V34A39, V23A39 | **Server list update failed** | See [The server list won't update](#the-server-list-wont-update). | | V34A3A, V23A3A | **Server not available** | Choose another server. | | V34A42, V23A42 | **VPN killswitch protection active** | See [No internet after the connection dropped](#no-internet-after-the-connection-dropped). | | V34A43, V23A43 | **Connection failure** | 12VPX connects again by itself. If it happens often, choose another server or connection type. | | V34A45, V23A45 | **VPN connection problem** | Choose another server or connection type. | | V34A46, V23A46 | **Wrong date and time** | See [Wrong date and time](#wrong-date-and-time). | | V34A47, V23A47 | **Another program interferes with the VPN** | See [Other programs on your computer](#other-programs-on-your-computer). | | V34A48, V23A48 | **Unexpected change to proxy settings** | See [Other programs on your computer](#other-programs-on-your-computer). | | V34A23, V23A23 | **Waiting for the VPN helper** | See [The helper](#the-helper). | | V23A27 | **VPN helper installation cancelled** | See [The helper](#the-helper). | | V23A2A | **Helper tool is not available** | See [The helper](#the-helper). | For any other code, follow the **Help** window, or [contact us](#contact-support) with the code. ## Contact support If these steps don't help, [contact us](/en/contact). Please tell us: - whether you use a Mac or Windows, and which version, - the version of 12VPX, shown in the title of its main window, - your VPX username (never your password), - the server and connection type you used, - the exact message, with its code, or a screenshot, - when it happened, and whether it happens every time, - your network (home, office or public Wi-Fi), and any other VPN app or security software on your computer. Also [send us your log](#send-us-your-log). ### Send us your log The log shows us what 12VPX did. **It starts over each time 12VPX starts**, so send it before you quit or restart 12VPX or your computer. **Send the log file.** This is the best way: - **Mac:** in Finder, choose **Go → Go to Folder…** (Shift-Command-G), enter `~/Library/Logs` and press Return. Attach the file `vpngui.log` to your message. - **Windows:** press the Windows key and R together, enter `%APPDATA%\vpngui\12vpn\logs` and press Enter. Attach the file `vpngui.log` to your message. **Or copy it from the app.** Choose **View log** in the app menu. Right-click the text and choose **Copy All** on a Mac; on Windows, choose **Select All**, then right-click again and choose **Copy**. Paste it into your message. On Windows the **Log viewer** only holds the last 500 lines, so the file is better. **Clear** in the **Log viewer** only empties the window; the file stays. Only if neither way works, use the share button in the **Log viewer**, which starts an e-mail to us with the log. ### More detail in the log Our support team may ask you to turn on extra logging under **General → Logging:**, reproduce the problem and send the log again. Turn it off again afterwards. **Log raw protocol transmission** writes your sign-in details into the log: send that log only to us. ### Record a connectivity trace For drops, very high ping or lost packets that come and go, our support team may ask for a connectivity trace. It measures your connection once a second, inside and outside the VPX service. 1. Under **Advanced → Tracing:**, turn on **Trace connectivity**. The **Trace connectivity** window opens next to the main window. 2. Connect as usual and click **Start trace**. Use your computer normally until the problem has happened at least once or twice, and note the times. 3. Click **Stop trace**, then **Export trace**, and send us the zip file and the times. The trace records which apps connect to which addresses, and the file includes the app's log. Send it only to us. The trace is in version 1.48 and newer: if your **Advanced** settings have no **Tracing:** section, your version doesn't have it yet. ## Reset and uninstall **Reset**, under **Advanced → Uninstall:**, signs you out, puts all settings back to their defaults, including your **VPN Bypass** rules, and restarts 12VPX. Confirm with **OK** when it asks **Reset VPNGUI?**. Before a reset: - [send us your log](#send-us-your-log) if you want our help, because the restarted app starts a new one, - have your VPX username and password ready from the [Credentials page](/en/credentials). You rarely need it: try another connection type, another server and [updating your list of servers](/en/docs/12vpx/connecting#keep-your-server-list-up-to-date) first. To remove 12VPX, use the button next to **Reset**: **Uninstall completely** on a Mac, which asks for an administrator's password and also removes the helper, or **Uninstall** on Windows. If Windows then says **12VPX could not be removed completely**, restart your computer and delete the folder the message names.