--- title: Connecting and choosing a location in Floxcore description: Set up Floxcore with your QR code or setup link, connect and switch locations, read ping and data use, and keep your list of locations up to date. --- This page explains how to set up Floxcore, connect, and get the most from the **Locations** tab. Apple TV and Android TV work a little differently: see [Apple TV](/en/docs/floxcore/apple#apple-tv) and [Android TV](/en/docs/floxcore/android#android-tv). AUTOMATIC_TABLE_OF_CONTENTS ## Set up Floxcore The first time you open Floxcore, agree to the terms and privacy notice, then choose how to set it up: - **Setup with QR code:** scan the QR code from the [setup guide](/en/setup) for your device. If you are reading the setup guide on the same phone or tablet, tap the QR code instead: it opens Floxcore and sets it up. - **⋯ → Setup using Floxcore Setup URL:** paste a setup link. It must start with `https://` or `floxcore://`. Tap **Load**. - **Restore from another phone:** copy the setup from a device that already runs Floxcore, by iCloud, Google Drive or Bluetooth. See [Set up more devices](/en/docs/floxcore/other-devices). Then choose your sorting on the **Preferences** screen and tap **Done**. The QR code on our website expires if you don't use it within 30 minutes. If Floxcore says **Failed to load settings**, reload the setup page for a new code and try again. If you chose **Skip**, the **Locations** tab shows **Setup incomplete**: tap **Continue Setup**. Later, **Settings → Load locations from URL** and **Settings → Load locations from QR code** load a new setup. That replaces the one you had, without asking. ## Connect 1. On the **Locations** tab, tap a location. This only selects it: a check mark appears. 2. Tap **Connect** at the bottom of the screen. 3. The first time, allow Floxcore to add a VPN configuration (Apple devices) or to set up a VPN connection (Android). Floxcore can't connect until you allow it. The button then shows **Connecting…** and then **Disconnect**. To disconnect, tap **Disconnect**. If you didn't select a location, **Connect** uses the location you used last, or else the first one in the list. **To switch location while connected,** tap another location. Floxcore disconnects and connects to the new one straight away. **If Connect is gray,** your list of locations is empty or **(out-of-date)**, or Floxcore is still connecting or disconnecting. Update the list first: see [below](#keep-your-locations-up-to-date). The icon at the top left shows your device's own network (**Wi-Fi**, **Cellular**, **Wired** or **Not connected**), not whether Floxcore is connected. While you are connected, a shield icon appears next to it; tap it to see which location you are connected to. ## Read the location list Each location shows: - **Ping:** signal bars and a time in milliseconds. More bars mean a faster response. Ping is measured from your device straight to the location, so it shows how quickly the location answers, not how fast your connection will be. **unreachable** (Apple) or **pending** (Android) only means the test didn't get an answer: the location may still work, so try connecting. - **E** or **L** with a bar, for Elite locations and locations with a data limit. The bar shows the data you have used out of your allowance, as we report it. See [Unlimited, Limited and Elite data](/en/docs/unlimited-limited-elite). To measure all locations again, tap the gauge icon at the top right. To measure one, swipe it to the left and tap **Update ping** (right-click it on a Mac). **Find a location:** type in **Search location name or country**. **Sort the list:** tap the sliders icon (**Display Preferences**), turn on **Sort Locations List**, and choose **Sort by**: **Last used**, **Name** or **Ping**. When sorting is off, locations appear in our order. Floxcore has no automatic "fastest location": sorting by **Ping** comes closest. A lower ping doesn't always mean a faster connection. If everything is slow, see [Why is my connection slow?](/en/docs/slow-connection) ## Keep your locations up to date Floxcore downloads your list of locations again by itself when it is 3 hours old, for example when you open the app or your network changes. While you are connected, it also updates every 12 hours or so. To update it now, pull down on the list, or open **Settings → Update location list** and tap **Update list**. After a successful update, the next one has to wait a minute: the screen shows **Wait N seconds**. **Last updated** at the top of the list shows when the list was downloaded. When it is 2 days old, **(out-of-date)** appears, and Floxcore won't connect until it can download a new list. If updating fails, **Settings → Update location list** shows the reason after **Failure:**. See [Troubleshooting](/en/docs/floxcore/troubleshooting#the-list-of-locations-wont-update). When we change a location while you are connected to it, Floxcore reconnects for a moment to use the new details. If the location you used is gone, Floxcore connects to another one, from the same country when possible, and shows **Location changed**. ## Where your traffic goes While Floxcore is connected, your device's traffic goes through the VPX service, with these exceptions: - Your local network, such as your router, printer or TV, is always reached directly. - Addresses you add under [Split tunnels](/en/docs/floxcore/settings#split-tunnels), and on Android the apps you leave out with [App routing](/en/docs/floxcore/settings#app-routing-android). - On locations for China, Chinese websites and apps connect directly. See [Floxcore in China](/en/docs/floxcore/china).