---
title: GL-iNet Slate 7 with Passwall
description: 
---

These instructions are intended for the **Slate 7** router from GL-iNet. Other GL-iNet routers are not supported.

## Requirements

* **Network** > **DNS** > **Allow Custom DNS to Override VPN DNS** must be **disabled**.
* **Network** > **Network mode** must be set to **Router**
* **Network** > **IPv6** > **Enable IPv6** must be **disabled**.
* Router must be tested an functioning correctly before setting up 12VPX.

## Warning

Using PassWall on the Slate 7 requires you to use the LuCI configuration interface. Changes made using LuCI may conflict with the regular Slate 7 interface. We recommend you use LuCI to setup PassWall but make no other changes.

## Install plug-ins

* Go to Applications > Plug-ins and select Manage Sources
* Add the following sources:
  * passwall2: https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-23.05/aarch64_cortex-a53/passwall2
  *  

## Setup

* Select **System** > **Advanced Settings** > **Go To LuCI**.
* Login with username **root** and your regular Slate 7 password.


## Notes

* When you **restart the router**, it can take **several minutes** for Passwall to start functioning.
* Due to the large number of servers provided by 12VPX, loading the **Node List** page in Passwall can **take up to 30 seconds**.