12VPX

GL-iNet Slate 7 with Passwall

These instructions are intended for the Slate 7 router from GL-iNet. Other GL-iNet routers are not supported.

Requirements

  • Network > DNS > Allow Custom DNS to Override VPN DNS must be disabled.
  • Network > Network mode must be set to Router
  • Network > IPv6 > Enable IPv6 must be disabled.
  • Router must be tested an functioning correctly before setting up 12VPX.

Warning

Using PassWall on the Slate 7 requires you to use the LuCI configuration interface. Changes made using LuCI may conflict with the regular Slate 7 interface. We recommend you use LuCI to setup PassWall but make no other changes.

Install plug-ins

  • Go to Applications > Plug-ins and select Manage Sources
  • Add the following sources:
    • passwall2: https://sourceforge.net/projects/openwrt-passwall-build/files/releases/packages-23.05/aarch64_cortex-a53/passwall2

Setup

  • Select System > Advanced Settings > Go To LuCI.
  • Login with username root and your regular Slate 7 password.

Notes

  • When you restart the router, it can take several minutes for Passwall to start functioning.
  • Due to the large number of servers provided by 12VPX, loading the Node List page in Passwall can take up to 30 seconds.