With Home Node, a computer or router at home becomes a server that only your own devices can use. When you travel, connect to it from your phone or laptop to:
- use your home internet connection, with the IP address your bank and streaming services know
- reach devices on your home network, such as a NAS or printer
Any computer or router running 12VPX NEO can share itself as a Home Node. Every 12VPX NEO app on the same account can connect to it.
Contents
Turn it on
On the computer or router at home, open Settings → Network and turn on Home Node, or run vpx home-server enable.
The app then shows its status, such as Sharing on TCP port 41234 · external address 203.0.113.5, and whether it can be reached:
| Status | Meaning |
|---|---|
| reachable from outside | Ready. Your other devices can use it. |
| reachable over IPv6 only | Your devices can reach it from networks that have IPv6, but not from networks without it. |
| NOT reachable from outside | Your other devices can't reach it yet. See below. |
| checking reachability… | Wait a moment. |
The computer must stay switched on and connected to the internet to be used. It doesn't have to be connected to the VPX service itself.
If it is not reachable
Home Node needs one TCP port that can be reached from the internet. 12VPX NEO tries to open it by itself: through UPnP on a normal home router, or in the router's own firewall on OpenWrt. If that doesn't work, it tells you the port. Forward that TCP port to this computer in your router's settings, often under Port forwarding or Virtual server.
Some internet providers share one public address between many customers, called carrier-grade NAT. You can recognize it when your router's own internet address starts with 10. or 100.64.. Port forwarding can't work then, and 12VPX NEO says so. Two ways out:
- Many of these providers also give you IPv6, which needs no port forwarding. 12VPX NEO uses it by itself; the status then says reachable over IPv6 only. Your router may need to allow incoming connections.
- Ask your provider for a public IPv4 address.
Use it from another device
On your phone or laptop, your Home Node appears in the server list with the label Home (Home Server on phones). Choose it to connect.
- Traffic through your Home Node doesn't count against your data.
- Automatic doesn't choose a Home Node by itself. To include it, star it and choose Favorites as the Automatic region. See Choosing a server.
- A device can't connect to its own Home Node.
Reach your home devices
While you are connected to your Home Node, you can reach devices on your home network by their usual address, such as 192.168.1.10 for a NAS.
If the network you are visiting uses the same address range as your home network, for example both use 192.168.1.x, the network you are visiting wins and your home devices can't be reached. Changing your home network to a less common range, such as 192.168.77.x, avoids this.
Turn it off
Turn off Home Node under Settings → Network, or run vpx home-server disable. A Home Node that stays switched off for 30 days disappears from your server list by itself.